- 708-647-4900
- info@ascindustries.com
- 1406 W. 175th St. East Hazel Crest, IL 60429
HiPac compacted, flexible wire rope with higher breaking loads than standard 35×7. The high lateral stability makes it perfectly suited for multi layer spooling. Due to the sophisticated construction, Dynamiq also features peak nonrotational properties. Dynamiq is the best choice as the main and auxiliary hoist line for Crawler cranes, and all types of tower cranes which require a high strength non-rotating rope construction. Superior non-rotating properties make this rope a great choice for all single and multiple line reeving applications.
High strength 6-strand rope for applications which require a crush resistant rope to be used on multiple layer winding systems. Because constructional stretch is near zero it can be used where a ‘pre-stretched’ rope would be required.
Super-8R is the next step up from regular 8×36 wire rope for overhead cranes with the ability to operate with fleet angles up to 4°. The 8-strand construction provides an excellent combination of flexibility and performance.
Super 8C is a classic ‘upgrade’ rope for all overhead crane types for increased rope service life performance while maintaining the ability to operate with fleet angles up to 4°. The 8-strand construction provides an excellent combination of flexibility, fatigue life and abrasion resistance. This rope is also the idea choice for container- and port cranes. We can provide this rope in ‘dual-tensile strength’ by which the outer strand wires are made from higher fatigue resistant steel.
Super 8V is an upgrade rope for all overhead crane types which require a stronger rope to increase the crane capacity while maintaining the ability to operate with fleet angles of up to 4°. The 8-strand construction provides an excellent combination of flexibility and abrasion resistance. Also used in looping- or accumulator tower applications.
Developed for maximum performance on overhead cranes. This rope features a plastic coated core for extended fatigue life performance and permanent core lubrication. Python® Multi is spin resistant to reduce block twisting on overhead cranes. Recommended for looping- or accumulator tower applications.
All steel high strength type for overhead cranes. This rope is swage compacted to enhance abrasion characteristic and to reduce sheave- and drum wear. Up to 40% strength increase over standard 6-strand constructions.
Ultra high strength type mainly used as high fatigue resistant rope for engineered cable assemblies. Up to 55% strength increase over standard 6-strand constructions. Sensitive to introduced rotation so call before you select this rope for overhead crane applications.
Same design geometry as 19×7 but due to a larger number of individual wires it is more flexible. The rope is strand compacted to provide for better drum spooling and less mechanical interlocking at the cross-over points. Recommended as standard rope type for Grove-, Terex-, National-, Century- and other US made truck- and mobile cranes. Python® Compac 18 is a rotation resistant rope and should only be used where these demands are low or moderate. NOT to be used in high cycle- high fatigue applications and NOT to be used with a swivel.
Recommended to be used on tower- and european type mobile cranes. Available in left- and right hand lay as well as in regular- and lang’s lay constructions. Recommended to be used in single line applications. ALLOWED to be used with a swivel.
Medium strength, high fatigue resistant non-rotating type. Compacting increases strength and sheave contact area. The plastic coated core increases fatigue life and prevents premature inner wire breaks as well as providing for permanent core lubrication. ALLOWED to be used with a swivel.Popular as ship crane main hoist rope.
Galvanized Aircraft:
 | AIRCRAFT CABLE & STRAND (Not For Aircraft Use) |
 |
Stainless Steel Aircraft (SSAC):
 | STAINLESS STEEL CABLE |
 | STAINLESS STEEL |
Jacketed Aircraft:
 | |
 |
Standard Wire Ropes:
 | |
 |
Spin-resistant Wire Ropes:
 | |
 |
