Sparkeater®
When you have a hot environment up to 300°F (149°C), use a Sparkeater ® to lift the load without marring the surface of the lifted piece. Also, when doing stage rigging, order this product with a black cover for the protection it gives from exposure to fire, heat, sparks and pyrotechnics. These slings are made from aramid high performance core yarns and an armid cover. The Offshore Certification Bureau identified these slings as good as wire rope or chain for use in offshore applications in the oil industry. As with all Twin-Path ® slings, an inner red cover provides an early warning safety alert.
|
SPARKEATER
|
|
Twin-Path Stock No.
|
Rated Capacities (lbs.)
|
Approx. Weight (lbs. per Ft.) (Bearing-Bearing)
|
Nominal Body Width (inches)
|
|
Vertical
|
Choker
|
Vertical Basket
|
Basket Hitches
|
|
90°
|
60°
|
45°
|
|
|
|
|
|
|
|
|
|
|
TPSE 1000
|
10000
|
8000
|
20000
|
17320
|
14140
|
0.4
|
1.5 - 3”
|
|
TPSE 1500
|
15000
|
12000
|
30000
|
25980
|
21210
|
0.45
|
1.5 - 3”
|
|
TPSE 2000
|
20000
|
16000
|
40000
|
34640
|
28280
|
0.51
|
1.5 - 3”
|
|
TPSE 2500
|
25000
|
20000
|
50000
|
43300
|
35350
|
0.57
|
1.5 - 3”
|
|
TPSE 3000
|
30000
|
24000
|
60000
|
51960
|
42420
|
0.71
|
2.0 - 4”
|
|
TPSE 4000
|
40000
|
32000
|
80000
|
69280
|
56560
|
0.83
|
2.0 - 4”
|
|
TPSE 5000
|
50000
|
40000
|
100000
|
86600
|
70700
|
1.14
|
2.0 - 4”
|
|
TPSE 6000
|
60000
|
48000
|
120000
|
103920
|
84840
|
1.27
|
2.0 - 4”
|
|
TPSE 7000
|
70000
|
56000
|
140000
|
121240
|
98980
|
1.39
|
3.5 - 7”
|
|
TPSE 8500
|
85000
|
68000
|
170000
|
147220
|
120190
|
1.65
|
3.5 - 7”
|
|
TPSE 10000
|
100000
|
80000
|
200000
|
173200
|
141400
|
1.84
|
3.5 - 7”
|
| METRIC CAPACITIES AVAILABLE |
DO NOT EXCEED RATED CAPACITY |
PLEASE NOTE: CAPACITIES SHOWN INCLUDE BOTH PATHS AND ARE FOR ONE COMPLETE SLING. SMALLER AND LARGER CAPACITIES AVAILABLE UPON REQUEST.
WARNING!
Slings can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity. Protect slings from being cut by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and temperature over 300°F. DEATH or INJURY can occur from improper use or maintenance.