Search Keywords or products

Twin-Path ® Extra (TPXC) Sling
With Covermax ® and K-Spec ® Core Yarn

(Check-Fast ® Inspection optional)

US Patent #5,651,572 & #7,661,737     CA #2,195,393 & #2,547,632
EP #0785163 & #1899255     Japan #2929431     Australia #707924

 

This is the world’s first truly ergonomic sling with Covermax ® covers for superior abrasion resistance. These are made in sizes up to 600 tons vertica

l rated capacity. Larger capacity slings are available on special order. These slings have overload indicators, inner red cover, and are used world-wide in place of wire rope slings for heavy lifts. They are approximately 10% of the weight of a steel sling. These products 

are repairable. The Twin-Path ® patented design provides the rigger with two connections between the hook and the load for redundant back-up protection. These slings have less than 1% stretch at rated capacity. If ergonomics, productivity and safety are important, then these slings are the only choice. This is the lightest and strongest sling on the market today with K-Spec ® - the longest lasting load bearing core yarn, backed by                                                                                            independent testing.

 

NOTE: Capacities shown include both paths and are one complete sling. Sling ratings based on fittings of equal of grater capacity. Conforms to ANSI/ASME B30.9 chapter 6, NAVFAC P-307 section 14.6.4.3, and the Cordage Institute Round-sling Standard. This chart is based on 5:1 Design Factor (DF); but any other DF can be fabricated. Higher capacity slings are available. CAPACITIES ARE IN POUNDS (LBS.).

TWIN - PATH EXTRA COVERMAX SPECIFICATIONS

Twin-Path, Extra Covermax - Stock no.

Choker

Vertical

90°

60°

45°

Approximate Weight   (lbs. per Ft.) (Bearing-Bearing)

Approximate Body Width (inches)

 

 

 

 

 

 

 

 

TPXCF/TPXC 1000

8000

10000

20000

17320

14140

0.4

1.5 - 3”

TPXCF/TPXC 1500

12000

15000

30000

25980

21210

0.45

1.5 - 3”

TPXCF/TPXC 2000

16000

20000

40000

34640

28280

0.51

1.5 - 3”

TPXCF/TPXC 2500

20000

25000

50000

43300

35350

0.57

2.0 - 4”

TPXCF/TPXC 3000

24000

30000

60000

51960

42420

0.71

2.0 - 4”

TPXCF/TPXC 4000

32000

40000

80000

69280

56560

0.83

2.0 - 4”

TPXCF/TPXC 5000

40000

50000

100000

86600

70700

1.14

2.5 - 5”

TPXCF/TPXC 6000

48000

60000

120000

103920

84840

1.27

2.5 - 5”

TPXCF/TPXC 7000

56000

70000

140000

121240

98980

1.39

2.5 - 5”

TPXCF/TPXC 8500

68000

85000

170000

147220

120190

1.65

3.0 - 6”

TPXCF/TPXC 10000

80000

100000

200000

173200

141400

1.84

3.0 - 6”

TPXCF/TPXC 12500

100000

125000

250000

216500

176750

2.35

4.0 - 8”

TPXCF/TPXC 15000

120000

150000

300000

259800

212100

2.66

4.0 - 8”

TPXCF/TPXC 17500

140000

175000

350000

303100

247450

3.14

4.0 - 8”

TPXCF/TPXC 20000

160000

200000

400000

346400

282800

3.45

5.0 - 10”

TPXCF/TPXC 25000

200000

250000

500000

433000

353500

4.07

5.0 - 10”

TPXCF/TPXC 27500

220000

275000

550000

476300

388850

4.61

6.0 - 12”

TPXCF/TPXC 30000

240000

300000

600000

519600

424200

4.92

6.0 - 12”

TPXCF/TPXC 40000

320000

400000

800000

692800

565600

6.54

7.0 - 14”

 TPXCF/TPXC 50000

400000

500000

1000000

866000

707000

8.15

7.0 - 14”

 TPXCF/TPXC 60000

480000

600000

1200000

1039000

848000

10.2

8.0 - 16”

                                      (Metric Slings Available)

                                    *Dimensions can vary according to the hardware or bearing points the slings are used with.

                                     (Metric Slings Minimum is “tapered” width; Maximum is the flat tubing width.)

                                   

 

WARNING!

Slings can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity. Protect slings from being cut by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and temperature over 180°F. DEATH or INJURY can occur from improper use or maintenance.

Get A
FREE QUOTE
Click here and complete the request form. We will reply with an estimate within 48 hours.
Connect with us
Customer Access to
Certification Documents
Home |  Company  |  Catalog  |  Contact Us  |  Privacy Policy |  Terms of Use |  Sitemap  |  Login
Copyright © 2011 ASC Industries LTD. All Rights Reserved.  |  Built and Powered by WSI